Cable Tray Manufacturer & Supplier in Pakistan
Electric Power Engineering is a cable tray manufacturer in Pakistan, based in Lahore, producing perforated, ladder, wire mesh and solid bottom cable trays GI, hot-dip galvanized, powder-coated, stainless steel and aluminium. Operating from Mominpura Road since 2017, we supply contractors, factories, solar projects and commercial buildings in Lahore with custom sizes, bends and accessories made to order.
Types of Cable Trays We Manufacture in Lahore
A cable tray is a rigid support system that carries and organizes electrical, data and control cables in buildings and plants. It is an open or ventilated alternative to conduit, and comes in perforated, ladder, wire mesh and solid bottom designs.
Electric Power Engineering manufactures four types of cable tray in Lahore: perforated, ladder, wire mesh and solid bottom. Perforated trays suit power, control and data cables that need ventilation. Ladder trays carry heavy power cables over long spans in factories, power plants and substations. Wire mesh trays suit data centers, telecom rooms and commercial buildings. Solid bottom trays protect sensitive cables from dust and interference. Each type is made in GI, pre-galvanized, hot-dip galvanized, powder-coated, stainless steel (SS 304 / 316), aluminium or mild steel, in custom sizes, widths and thicknesses. Electric Power Engineering also fabricates bends, tees, reducers, covers, support brackets and clamps to match each project, and supplies contractors, solar developers, textile and pharmaceutical plants and commercial builders across Lahore, Sheikhupura, Kasur, Gujranwala, Sialkot and Faisalabad.
Along with cable trays, Electric Power Engineering supplies EMT conduit pipes and fittings, solar panel mounting structures, earthing materials, Orbital ESE lightning protection systems, flexible pipes, distribution boxes, cable termination materials and route marker signs for electrical, solar and industrial projects.
Explore Each Cable Tray Type
| Product | What to expect |
|---|---|
| Perforated cable tray sizes and price | Slotted base for mixed power, control and data cables |
| Ladder cable tray for heavy power cables | Open rungs for long spans and heavy loads |
| GI cable tray for indoor wiring | Economical pre-galvanized tray for dry areas |
| Wire mesh cable tray for data cables | Light steel basket for data and telecom runs |
| Cable tray bends, brackets and accessories | Fittings, supports and covers in matching finishes |
Cable Tray Materials and Finishes
The material and finish decide how long a tray lasts in your building. Electric Power Engineering manufactures cable trays in five finishes, and the choice depends on where the tray will run.
GI (Pre-Galvanized)
Zinc is applied to the steel sheet before forming. It is economical and suits dry indoor areas. Cut edges are not covered by zinc, so it is not suitable outdoors.
MS Hot-Dip Galvanized
Mild steel trays are fabricated first, then dipped in molten zinc, so the coating covers edges and welds. This is the standard for factories, rooftops and outdoor runs.
Stainless Steel (SS 304 / SS 316)
SS 304 suits food plants, pharmaceutical units and clean areas. SS 316 is for chemical and wash-down environments. It costs the most and needs almost no maintenance.
Aluminium
Light, corrosion resistant and non-magnetic, aluminium suits rooftops and HVAC plant rooms. It is less strong than steel, so spans and loads must be checked.
Powder-Coated
A polyester coating over GI or MS gives a clean finish in RAL colors. It suits indoor areas and is not a substitute for galvanizing outdoors.
Which Finish for Which Place?
| Environment | Recommended finish |
|---|---|
| Dry indoor offices, shops | GI or powder-coated |
| Factories, warehouses | MS hot-dip galvanized |
| Rooftops, outdoor, solar runs | Hot-dip galvanized or aluminium |
| Food, pharma, wash-down | SS 304 or SS 316 |
Lahore’s humid monsoon months and dusty industrial areas wear thin zinc coatings faster, so for anything outdoors or in a plant, choose hot-dip galvanized or better.
Cable Tray Sizes and Custom Orders
All standard sizes are available, and any other size is made to order.
- Widths: from 50 mm up to 900 mm
- Depths: 25 mm to 150 mm
- Lengths: 2.5 m or 3 m standard, other lengths on request
- Sheet thickness: 0.8 mm to 3 mm
For full size charts, see the product pages above and our cable tray types and sizes guide. Send your drawing or cable schedule and our Lahore workshop will fabricate to it. Bends, tees, reducers, covers, brackets and hangers are made in the same finish as the tray, so one supplier covers the whole run.
How to Choose a Cable Tray Manufacturer in Pakistan
Before you order, check that the supplier:
- Manufactures in its own factory. Ask to visit.
- Can prove the finish. For galvanized trays, ask for a coating test report.
- Makes custom sizes. Stock-only suppliers can’t fit unusual runs.
- Supplies accessories and supports. Mixed makers cause fit problems.
- Has delivery experience to your city.
- Can show real projects with photos and locations.
Which Tray Fits Your Project?
- Heavy power cables over long spans: ladder tray
- Mixed power, control and data in buildings: perforated tray
- Data and telecom runs: wire mesh tray
- Budget indoor wiring: GI tray
Where Our Cable Trays Are Used
Electric Power Engineering supplies factories and textile mills, pharmaceutical and food plants, hospitals and commercial buildings, substations and power plants, solar projects, and data centers.
Cable Tray Supply in Lahore and Nearby Cities
Our factory is on Mominpura Road, Lahore. We deliver to Lahore, Sheikhupura, Kasur, Gujranwala, Sialkot and Faisalabad.
Why Buyers Choose Electric Power Engineering
- Factory-direct supply without middlemen
- Made to order in any size and finish
- One supplier for the job: EMT conduit, earthing materials, lightning protection and cable termination materials
- Operating since 2017. See our certifications and clients
Cable Tray Price in Pakistan: What Decides the Cost
Prices move with steel and zinc rates, so we quote each order. The main factors are tray type, material and finish, sheet thickness, width and depth, and quantity plus delivery city.
How to Get an Accurate Quote
What to Send
Tray type, width × depth, thickness, finish, length, quantity and delivery city. For larger projects, attach your drawing or cable schedule.
Where to Send It
WhatsApp or the contact page.
Cable Tray FAQs
Common questions about our products and services
Check that the supplier makes trays in its own factory, offers your finish, makes custom sizes and can show a galvanizing test report. Electric Power Engineering manufactures in Lahore and welcomes factory visits.
It depends on type, width, depth, thickness, finish and quantity. Send your specification for a project quote.
GI is cheaper and suits dry indoor areas. Hot-dip galvanized lasts much longer outdoors and in factories because the zinc covers cut edges and welds.
Yes, if they are hot-dip galvanized, stainless steel or aluminium, ideally with covers. Pre-galvanized trays are not recommended outdoors.
Yes. We fabricate custom widths, depths, thicknesses and fittings to your drawing or cable schedule.
We deliver from our Lahore factory to Sheikhupura, Kasur, Gujranwala, Sialkot and Faisalabad. Delivery time depends on order size and finish, so ask our sales team for your city.
Yes. Bends, tees, reducers, covers, brackets and hangers are made in the same finish as the tray.
A perforated tray has a slotted base and suits mixed cables. A ladder tray has open rungs and carries heavier cables over longer spans. For a full comparison, see our types and sizes guide.
Have Cable Tray Requirement?
Share your requirement with Electric Power Engineering and discuss the products, specifications and supply requirements for your project.