Kalre ESE Lightning Arrester in Pakistan | Price, Models & Specifications
Electric Power Engineering (EPEPK) is an authorized dealer and supplier of Kalre ESE Lightning Arresters and Active Lightning Rods in Pakistan for industrial, commercial, residential, solar and infrastructure projects. The Kalre range includes Strong 60, Strong 30 and ALR-04 ESE lightning protection models, allowing project requirements to be matched with different advance-time and protection-radius specifications.
Kalre is a Turkish lightning protection brand that develops active lightning protection products based on the Early Streamer Emission (ESE) principle. Kalre states that its products are developed for lightning protection systems and tested against relevant international standards, including NF C 17-102:2011.
If you are looking for a Kalre ESE lightning arrester price in Pakistan, contact Electric Power Engineering for the latest quotation, availability and project-specific requirements.
Kalre ESE Lightning Arrester Price in Pakistan
The price of a Kalre ESE lightning arrester in Pakistan depends on the model, protection requirements, accessories, installation arrangement and project quantity.
For this reason, Electric Power Engineering provides quotation-based pricing rather than displaying a fixed price that may become outdated.
Request a Kalre lightning arrester quotation for your building, factory, warehouse, solar project or commercial installation.
Available Kalre Models: Strong 60 | Strong 30 | ALR-04
Kalre ESE Lightning Arrester Models
Kalre offers different ESE active lightning rod configurations for lightning protection applications. On this page, Electric Power Engineering provides three models: Kalre Strong 60, Kalre Strong 30 and Kalre ALR-04.
Kalre Strong 60 ESE Lightning Arrester
The Kalre Strong 60 ESE Lightning Arrester is an active lightning protection device using the PDC/PDA ESE operating principle. Published technical information identifies the Strong 60 with a 60 µs advance time (ΔT) and a protection radius of up to 107 metres. The product uses stainless chrome 304-L material and is specified for use with the NF C 17-102 standard.
The Strong 60 is suitable for projects where a larger calculated protection radius is required, subject to the overall lightning protection design and installation conditions.
Kalre Strong 60 Specifications
| Specification | Kalre Strong 60 |
|---|---|
| Product Type | ESE Active Lightning Rod |
| Brand | Kalre |
| Model | Strong 60 |
| Working Principle | PDC / PDA (E.S.E.) |
| Advance Time (ΔT) | 60 µs |
| Outer Material | Stainless Chrome 304-L |
| Product Height | Approximately 380 mm |
| Product Weight | Approximately 2,200 g |
| Protection Radius (Rp) | Up to 107 m |
| Standard | NF C 17-102:2011 |
| Application | Lightning Protection Systems |
Published product information lists Strong 60 at approximately 380 mm height and 2,200 g weight, with a 107 m protection radius and 60 µs advance time.
Kalre Strong 60 Protection Radius
The published Strong 60 protection radius is 107 metres. The actual protected area should be calculated according to the applicable protection level, installation height and lightning protection system design rather than treating the maximum radius as a universal coverage value.
Kalre Strong 30 ESE Lightning Arrester
The Kalre Strong 30 ESE Lightning Arrester is an ESE active lightning rod with a 35 µs advance time (ΔT) and a published maximum protection radius of 77 metres.
The Strong 30 datasheet specifies stainless chrome 304-L construction, a 400 mm product height and approximately 2.185 kg product weight. Its working principle is identified as PDC/PDA (E.S.E.), with NF C 17-102 Annex C (2011) listed as the standard.
Kalre Strong 30 Specifications
| Specification | Kalre Strong 30 |
|---|---|
| Product Type | ESE Active Lightning Rod |
| Brand | Kalre |
| Model | Strong 30 |
| Working Principle | PDC / PDA (E.S.E.) |
| Advance Time (ΔT) | 35 µs |
| Outer Material | Stainless Chrome 304-L |
| Product Height | 400 mm |
| Product Weight | 2.185 kg |
| Ion Cell Height | 120 mm |
| Ion Cell Diameter | Ø76 mm |
| Catching Tip Diameter | Ø30 mm |
| Trigger | Neodymium |
| Standard | NF C 17-102 Annex C (2011) |
| Protection Radius (Rp) | 77 m |
Kalre Strong 30 Protection Radius
The Strong 30 datasheet gives the following protection-radius values:
| Protection Level | Reference Height | Protection Radius |
|---|---|---|
| Level 1 | 20 m | 53 m |
| Level 2 | 30 m | 60 m |
| Level 3 | 45 m | 69 m |
| Level 4 | 60 m | 77 m |
Therefore, the maximum listed Strong 30 protection radius is 77 metres at the specified Level 4 condition.
Kalre ALR-04 ESE Lightning Arrester
The Kalre ALR-04 ESE Lightning Arrester is a stainless-steel active lightning rod designed around the PDC/PDA ESE operating principle.
According to the Kalre technical specification, the ALR-04 has a 60 µs advance time and a maximum listed protection radius of 107 metres. The manufacturer specifies Stainless Chrome 304-L construction and NF C 17-102 Annex C (2011) as its standard reference.
Kalre ALR-04 Specifications
| Specification | Kalre ALR-04 |
|---|---|
| Product Type | ESE Active Lightning Rod |
| Brand | Kalre |
| Model | ALR-04 |
| Outer Material | Stainless Chrome 304-L |
| Product Height | 600 mm |
| Product Weight | 4.200 kg |
| Ion Cell Height | 145.46 mm |
| Ion Cell Diameter | Ø195 mm |
| Catching Tip Diameter | Ø20 mm |
| Trigger | Neodymium |
| Working Principle | PDC / PDA (E.S.E.) |
| Standard | NF C 17-102 Annex C (2011) |
| Advance Time (ΔT) | 60 µs |
| Protection Radius (Rp) | 107 m |
The ALR-04 datasheet lists protection-radius values of 79 m, 86 m, 97 m and 107 m for Levels 1 through 4 respectively.
Kalre ALR-04 Protection Radius
| Protection Level | Reference Height | Protection Radius |
|---|---|---|
| Level 1 | 20 m | 79 m |
| Level 2 | 30 m | 86 m |
| Level 3 | 45 m | 97 m |
| Level 4 | 60 m | 107 m |
This makes ALR-04 one of the higher-radius models in the Kalre range presented on this page.
How Kalre ESE Lightning Arresters Work
Kalre ESE lightning rods operate using the Early Streamer Emission (ESE) principle. The products listed on this page use a PDC/PDA operating principle.
In an ESE lightning protection system, the air terminal is installed at a suitable elevated location so that it can serve as the preferred interception point for a lightning discharge. The lightning current is then conducted through the down-conductor system and safely discharged into the grounding system.
A complete lightning protection system should therefore be considered as more than the air terminal alone.
Kalre Lightning Protection System Components
An ESE air terminal is normally only one part of a complete lightning protection system.
Depending on the project, a complete system can include:
- Kalre ESE active lightning rod
- Lightning air-terminal mast
- Down conductor
- Test joint
- Lightning conductor clamps
- Earth inspection pit
- Earthing electrode
- Copper or suitable grounding conductor
- Earth enhancement material
- Earth connection components
- Equipotential bonding components
- Lightning event counter where required
Electric Power Engineering can also supply related earthing and lightning protection materials for project requirements.
Kalre ESE Lightning Arrester for Industrial and Commercial Buildings
Factories, warehouses, commercial buildings and other large structures may require a properly designed external lightning protection system because of their size, height, electrical equipment and operational requirements.
The Kalre Strong 30, Strong 60 and ALR-04 models provide different published ESE specifications. The final selection should be based on the building dimensions, required protection level, installation arrangement and engineering design.
For larger industrial projects, the maximum published protection radius should not be treated as a simple circular coverage guarantee. Instead, the complete lightning protection design should determine the number and positioning of air terminals.
Kalre ESE Lightning Arrester for Solar Projects
Solar installations contain valuable electrical and electronic equipment that can be exposed to lightning-related risks.
A lightning protection design for a solar project may include:
- ESE air terminal
- Down conductors
- Proper earthing system
- Equipotential bonding
- Surge protection devices
- Solar DC and AC protection
- Equipment bonding
- Grounding and lightning protection accessories
Electric Power Engineering can supply Kalre ESE lightning protection products and related earthing materials for commercial and industrial solar projects.
Kalre ESE Lightning Arrester Supplier in Pakistan
Electric Power Engineering supplies electrical, earthing and lightning protection products for projects across Pakistan.
For Kalre ESE Lightning Arrester in Pakistan, customers can contact EPEPK for:
- Strong 30
- Strong 60
- ALR-04
- Lightning protection accessories
- Earthing materials
- Project quantities
- Technical product information
- Price quotations
- Supply requirements
Product availability and pricing may vary according to model, quantity and project requirements.
Why Buy Kalre Lightning Protection Products from Electric Power Engineering?
Electric Power Engineering focuses on manufacturing and supplying electrical and lightning protection materials for commercial, industrial and solar projects.
Our product supply approach includes:
- Product-focused technical information
- Project quantity support
- Competitive quotation
- Pakistan-wide supply
- Earthing and lightning protection product availability
- Assistance with selecting products according to project requirements
For installation and engineering design, project owners should use qualified lightning protection professionals according to applicable requirements.
Frequently Asked Questions About Kalre ESE Lightning Arrester
What is a Kalre ESE Lightning Arrester?
A Kalre ESE Lightning Arrester is an Early Streamer Emission active lightning rod designed to form part of an external lightning protection system. Kalre identifies its active lightning rods with the PDC/PDA ESE operating principle and references NF C 17-102 in its technical material.
What is the difference between Kalre Strong 30 and Strong 60?
The main published difference is the ESE advance-time specification and protection radius. Strong 30 is specified at 35 µs and 77 m maximum radius, while Strong 60 is specified at 60 µs and 107 m maximum radius.
How much does a Kalre ESE Lightning Arrester cost in Pakistan?
Kalre ESE lightning arrester pricing depends on the model, quantity, accessories and supply requirements. Contact Electric Power Engineering for the current Pakistan quotation.
Where can I buy Kalre ESE Lightning Arrester in Pakistan?
Electric Power Engineering supplies Kalre ESE lightning protection products in Pakistan. Contact EPEPK for model availability, pricing and project requirements.
Request Kalre ESE Lightning Arrester Price and Quotation
Looking for Kalre ESE Lightning Arrester price in Pakistan?
Contact Electric Power Engineering for a quotation for:
Kalre Strong 30 | Kalre Strong 60 | Kalre ALR-04
You can also ask about related earthing material, lightning protection components and solar structures for your project. Request a quotation based on your required model, quantity and project application.
